LS-Series Lineare Achsen
Die Systeme der LS-Serie erhalten ihre hohe Auflösung und ausgezeichnete Wiederholgenauigkeit u.a. durch präzise Closed-Loop DC Servomotoren mit integrierten, hochauflösenden rotatorischen Encodern zur Positionsrückmeldung. Ein optionaler, linearer Encoder kann adaptiert werden, um eine noch größere Positioniergenauigkeit zu erzielen.
The stages utilize crossed-roller slides, precision lead-screws, and zero-backlash miniature geared DC servomotors for smooth and accurate motion. Die LS Systeme bieten einen präzisen Positionierung bei einem Verfahrweg von 50 mm bis 300 mm. They can be used singly or stacked, vertically or horizontally, and can carry loads up to 4.5 Kg (10 lbs).
The units have built-in limit switches, and can be configured with a number of lead screw options as outlined in the table below. In standard rotary encoder configuration and using ASI’s MS-2000 control electronics, resolutions in the 50-to-100 nm range can be easily obtained. Repeatability factors of less than 300 nm RMS are also obtainable.
An optional linear encoder provides a scale resolution of 10 nm, and with a scale accuracy of ± 3 μm per length of scale.
The MS-2000 controller provides automatic backlash correction, accepts industry standard commands, and accepts RS-232 or USB communication from a host computer.
LS-Series Linear Stage Lead Screw Options
| Lead Screw Pitch Options | Rotary Encoder Resolution | Maximum Speed |
| 25.40 mm (Ultra-coarse) | 88 nm | 28 mm/sec |
| 12.70 mm (Super-coarse) | 44 nm | 14 mm/sec |
| 6.35 mm (Standard) | 22 nm | 7 mm/sec |
| 1.59 mm (Fine) | 5.5 nm | 1.75 mm/sec |
| 0.635 mm (Extra-fine) | 2.2 nm | 0.7 mm/sec |
*Shown with rotary encoder and 6.35 mm pitch lead screw
LS-Series Linear Stage Specifications
| Spezifikationen | LS-25 | LS-50 | LS-100 | LS-200 | LS-400 |
| Encoder Resolution* | 5.0 nm | 5.5 nm | 5.5 nm | 5.5 nm | 5.5 nm (.0055 µm†) |
| With Linear Encoder | 10 nm | 10 nm | 10 nm | 10 nm | 10 nm |
| RMS Repeatability (Typical)* | < 0.7 μm | < 0.7 μm | < 0.7 μm | < 0.7 μm | < 0.7 μm (< 8.0 μm†) |
| With Linear Encoder (Typical) | 200 nm | 200 nm | 200 nm | 200 nm | 200 nm |
| Leadscrew Accuracy | 0.25 μm/mm | 0.25 μm/mm | 0.25 μm/mm | 0.25 μm/mm | 0.25 μm/mm |
| With Linear Encoder | ± 3 μm/length scale | ± 3 μm/length scale | ± 3 μm/length scale | ± 3 μm/length scale | ± 3 μm/length scale |
| Maximum Velocity* | 1.60 mm/sec | 1.75 mm/sec | 1.75 mm/sec | 1.75 mm/sec | 1.75 mm/sec |
| Range of Travel | 25 mm (1”) | 50 mm (2”) | 100 mm (4”) | 200 mm (8”) | 400 mm (16”) |
| Length | 86 mm (3.4”) | 152.5 mm (6”) | 203.5 mm (8”) | 305 mm (12”) | 594.5 mm (23.4”) |
| With Connector** | 137 mm (5.4”) | 233 mm (9.2”) | 286 mm (11.3”) | 369 mm (14.5”) | 675 mm (26.6”) |
| With RA Connector** | —– | 195 mm (7.6”) | 247 mm (9.7”) | 380 mm (15”) | 363 mm (25”) |
| Width | 68.5 mm (2.7”) | 68.5 mm (2.7”) | 68.5 mm (2.7”) | 68.5 mm (2.7”) | 150 mm (5.9”) |
| With Connector** | 120 mm (4.7”) | 132.5 mm (5.2”) | 132.5 mm (5.2”) | 132.5 mm (5.2”) | 215 mm (8.5”) |
| With RA Connector** | —– | 93.5 mm (3.7”) | 93.5 mm (3.7”) | 93.5 mm (3.7”) | 175 mm (6.9”) |
| Height | 35.5 mm (1.4”) | 30 mm (1.2”) | 30 mm (1.2”) | 30 mm (1.2”) | 50 mm (2”) |
| Weight | .5 kg (1 lbs) | 1.4 kg (3 lbs) | 1.9 kg (4 lbs) | 2.4 kg (6 lbs) | 9 kg (20 lbs) |
* With 1.59 mm pitch (16 TPI) Leadscrew
* * May vary per available plug dimensions
† with high-speed motor/gearhead configuration
